	Name	Description
	CanRead	Gets a value indicating whether the current stream supports reading. (Inherited from BinaryImageParserBase)
	CanSeek	Gets a value indicating whether the current stream supports seeking. (Inherited from BinaryImageParserBase)
	CanTimeout	Gets a value that determines whether the current stream can time out. (Inherited from Stream)
	CanWrite	Gets a value indicating whether the current stream supports writing. (Inherited from BinaryImageParserBase)
	CheckSumValidationFrameTypes	Gets or sets flags that determine if check-sums for specified frames should be validated. (Inherited from FrameParserBaseTFrameIdentifier)
	ConfigurationFrame	Gets or sets current IConfigurationFrame used for parsing IDataFrame's encountered in the data stream from a device. (Overrides FrameParserBaseTFrameIdentifierConfigurationFrame)
	ConnectionParameters	Gets or sets any connection specific IConnectionParameters that may be needed for parsing. (Overrides FrameParserBaseTFrameIdentifierConnectionParameters)
	Enabled	Gets or sets a boolean value that indicates whether the frame image parser is currently enabled. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	Length	The parser is designed as a write only stream, so this method is not implemented. (Inherited from BinaryImageParserBase)
	MessagePeriod	Gets or sets the desired message period for the SEL device.
	Name	Gets the name of BinaryImageParserBase. (Inherited from BinaryImageParserBase)
	Position	The parser is designed as a write only stream, so this method is not implemented. (Inherited from BinaryImageParserBase)
	ProtocolSyncBytes	Gets or sets synchronization bytes for this parsing implementation, if used. (Inherited from BinaryImageParserBase)
	ProtocolUsesSyncBytes	Gets flag that determines if SEL Fast Message protocol parsing implementation uses synchronization bytes. (Overrides BinaryImageParserBaseProtocolUsesSyncBytes)
	QueuedBuffers	Gets the total number of buffers that are currently queued for processing, if any. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	QueuedOutputs	Gets the total number of parsed outputs that are currently queued for publication, if any. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	ReadTimeout	Gets or sets a value, in miliseconds, that determines how long the stream will attempt to read before timing out. (Inherited from Stream)
	RedundantFramesPerPacket	Gets the number of redundant frames in each packet. (Inherited from FrameParserBaseTFrameIdentifier)
	RunTime	Gets the total amount of time, in seconds, that the BinaryImageParserBase has been active. (Inherited from BinaryImageParserBase)
	Status	Gets current descriptive status of the FrameParser. (Overrides FrameParserBaseTFrameIdentifierStatus)
	TotalProcessedBuffers	Gets the total number of buffer images processed so far. (Inherited from BinaryImageParserBase)
	TrustHeaderLength	Gets or sets flag that determines if header lengths should be trusted over parsed byte count. (Inherited from FrameParserBaseTFrameIdentifier)
	ValidateCommandFrameCheckSum	Gets flag based on CheckSumValidationFrameTypes property that determines if command frames are selected for check-sum validation. (Inherited from FrameParserBaseTFrameIdentifier)
	ValidateConfigurationFrameCheckSum	Gets flag based on CheckSumValidationFrameTypes property that determines if configuration frames are selected for check-sum validation. (Inherited from FrameParserBaseTFrameIdentifier)
	ValidateDataFrameCheckSum	Gets flag based on CheckSumValidationFrameTypes property that determines if data frames are selected for check-sum validation. (Inherited from FrameParserBaseTFrameIdentifier)
	ValidateHeaderFrameCheckSum	Gets flag based on CheckSumValidationFrameTypes property that determines if header frames are selected for check-sum validation. (Inherited from FrameParserBaseTFrameIdentifier)
	WriteTimeout	Gets or sets a value, in miliseconds, that determines how long the stream will attempt to write before timing out. (Inherited from Stream)

	Name	Description
	BeginRead	Begins an asynchronous read operation. (Consider using ReadAsync(Byte, Int32, Int32) instead.) (Inherited from Stream)
	BeginWrite	Begins an asynchronous write operation. (Consider using WriteAsync(Byte, Int32, Int32) instead.) (Inherited from Stream)
	Close	Closes the current stream and releases any resources (such as sockets and file handles) associated with the current stream. Instead of calling this method, ensure that the stream is properly disposed. (Inherited from Stream)
	CopyTo(Stream)	Reads the bytes from the current stream and writes them to another stream. (Inherited from Stream)
	CopyTo(Stream, Int32)	Reads the bytes from the current stream and writes them to another stream, using a specified buffer size. (Inherited from Stream)
	CopyToAsync(Stream)	Asynchronously reads the bytes from the current stream and writes them to another stream. (Inherited from Stream)
	CopyToAsync(Stream, Int32)	Asynchronously reads the bytes from the current stream and writes them to another stream, using a specified buffer size. (Inherited from Stream)
	CopyToAsync(Stream, Int32, CancellationToken)	Asynchronously reads the bytes from the current stream and writes them to another stream, using a specified buffer size and cancellation token. (Inherited from Stream)
	CreateObjRef	Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object. (Inherited from MarshalByRefObject)
	CreateWaitHandle	Obsolete. Allocates a WaitHandle object. (Inherited from Stream)
	Dispose	Releases all resources used by the Stream. (Inherited from Stream)
	Dispose(Boolean)	Releases the unmanaged resources used by the FrameParserBaseTFrameIdentifier object and optionally releases the managed resources. (Inherited from FrameParserBaseTFrameIdentifier)
	EndRead	Waits for the pending asynchronous read to complete. (Consider using ReadAsync(Byte, Int32, Int32) instead.) (Inherited from Stream)
	EndWrite	Ends an asynchronous write operation. (Consider using WriteAsync(Byte, Int32, Int32) instead.) (Inherited from Stream)
	Equals	Determines whether the specified object is equal to the current object. (Inherited from Object)
	Finalize	Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object)
	Flush	When overridden in a derived class, clears all buffers for this stream and causes any buffered data to be written to the underlying device. (Inherited from BinaryImageParserBase)
	FlushAsync	Asynchronously clears all buffers for this stream and causes any buffered data to be written to the underlying device. (Inherited from Stream)
	FlushAsync(CancellationToken)	Asynchronously clears all buffers for this stream, causes any buffered data to be written to the underlying device, and monitors cancellation requests. (Inherited from Stream)
	GetHashCode	Serves as the default hash function. (Inherited from Object)
	GetLifetimeService	Retrieves the current lifetime service object that controls the lifetime policy for this instance. (Inherited from MarshalByRefObject)
	GetType	Gets the Type of the current instance. (Inherited from Object)
	InitializeLifetimeService	Obtains a lifetime service object to control the lifetime policy for this instance. (Inherited from MarshalByRefObject)
	MemberwiseClone	Creates a shallow copy of the current Object. (Inherited from Object)
	MemberwiseClone(Boolean)	Creates a shallow copy of the current MarshalByRefObject object. (Inherited from MarshalByRefObject)
	ObjectInvariant	Obsolete. Provides support for a Contract. (Inherited from Stream)
	OnBufferParsed	Raises the BufferParsed event. (Inherited from BinaryImageParserBase)
	OnConfigurationChanged	Raises the ConfigurationChanged event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnDataDiscarded	Raises the DataDiscarded event. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	OnDataParsed	Raises the DataParsed event. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	OnDuplicateTypeHandlerEncountered	Raises the DuplicateTypeHandlerEncountered event. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	OnOutputTypeNotFound	Raises the OutputTypeNotFound event. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	OnParsingException	Raises the ParsingException event. (Inherited from BinaryImageParserBase)
	OnReceivedChannelFrame	Casts the parsed IChannelFrame to its specific implementation (i.e., DataFrame or ConfigurationFrame). (Overrides FrameParserBaseTFrameIdentifierOnReceivedChannelFrame(IChannelFrame))
	OnReceivedCommandFrame	Raises the ReceivedCommandFrame event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnReceivedConfigurationFrame	Raises the ReceivedConfigurationFrame event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnReceivedDataFrame	Raises the ReceivedDataFrame event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnReceivedFrameBufferImage	Raises the ReceivedFrameImage and ReceivedFrameBufferImage event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnReceivedHeaderFrame	Raises the ReceivedHeaderFrame event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnReceivedUndeterminedFrame	Raises the ReceivedUndeterminedFrame event. (Inherited from FrameParserBaseTFrameIdentifier)
	OnSourceDataParsed	Raises the SourceDataParsed event. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	OnUnknownFrameTypeEncountered	Handles unknown frame types. (Inherited from FrameParserBaseTFrameIdentifier)
	Parse(ISupportBinaryImage)	Obsolete. Not implemented. Consumers should call the Parse(TSourceIdentifier, ISupportBinaryImage) method instead to make sure data source source ID gets tracked with data buffer. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	Parse(TSourceIdentifier, ISupportBinaryImage)	Queues the object implementing the ISupportBinaryImage interface, from the specified data source, onto the stream for parsing. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	Parse(TSourceIdentifier, Byte)	Queues a sequence of bytes, from the specified data source, onto the stream for parsing. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	Parse(SourceChannel, Byte, Int32, Int32)	Queues a sequence of bytes, from the specified data source, onto the stream for parsing. (Overrides MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputTypeParse(TSourceIdentifier, Byte, Int32, Int32))
	ParseCommonHeader	Parses a common header instance that implements ICommonHeaderTTypeIdentifier for the output type represented in the binary image. (Overrides FrameImageParserBaseTTypeIdentifier, TOutputTypeParseCommonHeader(Byte, Int32, Int32))
	ParseFrame	Output type specific frame parsing algorithm. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	PublishParsedOutput	AsyncQueueT handler used to publish queued outputs. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	PurgeBuffer	Clears the internal buffer of unparsed data received from the specified source. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	Read	The parser is designed as a write only stream, so this method is not implemented. (Inherited from BinaryImageParserBase)
	ReadAsync(Byte, Int32, Int32)	Asynchronously reads a sequence of bytes from the current stream and advances the position within the stream by the number of bytes read. (Inherited from Stream)
	ReadAsync(Byte, Int32, Int32, CancellationToken)	Asynchronously reads a sequence of bytes from the current stream, advances the position within the stream by the number of bytes read, and monitors cancellation requests. (Inherited from Stream)
	ReadByte	Reads a byte from the stream and advances the position within the stream by one byte, or returns -1 if at the end of the stream. (Inherited from Stream)
	Seek	The parser is designed as a write only stream, so this method is not implemented. (Inherited from BinaryImageParserBase)
	SetLength	The parser is designed as a write only stream, so this method is not implemented. (Inherited from BinaryImageParserBase)
	Start	Start the data parser. (Overrides MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputTypeStart)
	Start(IEnumerableType)	Starts the data parser given the specified type implementations. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	Stop	Stops the streaming data parser. (Inherited from BinaryImageParserBase)
	ToString	Returns a string that represents the current object. (Inherited from Object)
	Write	Obsolete. Not implemented. Consumers should call the Parse(TSourceIdentifier, Byte, Int32, Int32) method instead to make sure data source source ID gets tracked with data buffer. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)
	WriteAsync(Byte, Int32, Int32)	Asynchronously writes a sequence of bytes to the current stream and advances the current position within this stream by the number of bytes written. (Inherited from Stream)
	WriteAsync(Byte, Int32, Int32, CancellationToken)	Asynchronously writes a sequence of bytes to the current stream, advances the current position within this stream by the number of bytes written, and monitors cancellation requests. (Inherited from Stream)
	WriteByte	Writes a byte to the current position in the stream and advances the position within the stream by one byte. (Inherited from Stream)

	Name	Description
	BufferParsed	Occurs when buffer parsing has completed. (Inherited from BinaryImageParserBase)
	ConfigurationChanged	Occurs when a device sends a notification that its configuration has changed. (Inherited from FrameParserBaseTFrameIdentifier)
	DataDiscarded	Occurs when data image fails deserialized due to an exception. (Inherited from BinaryImageParserBase)
	DataParsed	Occurs when a data image is deserialized successfully to one of the output types that the data image represents. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	DuplicateTypeHandlerEncountered	Occurs when more than one type has been defined that can deserialize the specified output type. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	OutputTypeNotFound	Occurs when matching an output type for deserializing the data image could not be found. (Inherited from FrameImageParserBaseTTypeIdentifier, TOutputType)
	ParsingException	Occurs when an Exception is encountered while attempting to parse data. (Inherited from BinaryImageParserBase)
	ReceivedChannelFrame	Occurs when any IChannelFrame has been received. (Inherited from FrameParserBaseTFrameIdentifier)
	ReceivedCommandFrame	Occurs when a ICommandFrame has been received. (Inherited from FrameParserBaseTFrameIdentifier)
	ReceivedConfigurationFrame	Occurs when a SEL Fast Message ConfigurationFrame has been received.
	ReceivedDataFrame	Occurs when a SEL Fast Message DataFrame has been received.
	ReceivedFrameBufferImage	Occurs when a frame image has been received, event includes buffer. (Inherited from FrameParserBaseTFrameIdentifier)
	ReceivedFrameImage	Occurs when a frame image has been received. (Inherited from FrameParserBaseTFrameIdentifier)
	ReceivedHeaderFrame	Occurs when a IHeaderFrame has been received. (Inherited from FrameParserBaseTFrameIdentifier)
	ReceivedUndeterminedFrame	Occurs when an undetermined IChannelFrame has been received. (Inherited from FrameParserBaseTFrameIdentifier)
	SourceDataParsed	Occurs when a data image is deserialized successfully to one or more of the output types that the data image represents. (Inherited from MultiSourceFrameImageParserBaseTSourceIdentifier, TTypeIdentifier, TOutputType)

	Name	Description
	StreamInitialized	Tracks if data stream has been initialized. (Inherited from BinaryImageParserBase)
	UnparsedBuffer	Remaining unparsed buffer from last parsing execution, if any. (Inherited from BinaryImageParserBase)

	Name	Description
	Compress	Compress a stream using specified compression strength. (Defined by CompressionExtensions)
	Compress	Compress a stream onto given output stream using specified compression strength. (Defined by CompressionExtensions)
	CopyStream	Copies input Stream onto output Stream. (Defined by StreamExtensions)
	CopyTo	Writes the contents of a stream to the provided stream. (Defined by StreamExtensions)
	Decompress	Decompress a stream. (Defined by CompressionExtensions)
	Decompress	Decompress a stream onto given output stream. (Defined by CompressionExtensions)
	Decrypt	Returns a stream of decrypted data for the given parameters. (Defined by Cipher)
	Decrypt	Decrypts input stream onto output stream for the given parameters. (Defined by Cipher)
	DeserializeToDataSet	Deserializes a DataSet from a Stream. (Defined by DataSetExtensions)
	Encrypt	Returns a stream of encrypted data for the given parameters. (Defined by Cipher)
	Encrypt	Encrypts input stream onto output stream for the given parameters. (Defined by Cipher)
	GetEnumValueOrDefault	Gets the enumeration constant for value, if defined in the enumeration, or a default value. (Defined by EnumExtensions)
	GetEnumValueOrDefaultT	Gets the enumeration constant for this value, if defined in the enumeration, or a default value. (Defined by EnumExtensions)
	Read7BitUInt32	Reads the 7-bit encoded value from the stream. (Defined by StreamExtensions)
	ReadAll	Reads all of the provided bytes. Will not return prematurely, but continue to execute a Read(Byte, Int32, Int32) command until the entire length has been read. (Defined by StreamExtensions)
	ReadBoolean	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadBytes	Reads a byte array from a Stream. The number of bytes should be prefixed in the stream. (Defined by StreamExtensions)
	ReadBytes	Reads a byte array from a Stream. The number of bytes should be prefixed in the stream. (Defined by StreamExtensions)
	ReadChar	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadDateTime	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadDecimal	Reads a decimal from the stream in Little Endian bytes. (Defined by StreamExtensions)
	ReadDouble	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadGuid	Reads a Guid from the stream in Little Endian bytes. (Defined by StreamExtensions)
	ReadInt16	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadInt32	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadInt32Collection	Writes the supplied string to a Stream in UTF8 encoding. (Defined by StreamExtensions)
	ReadInt64	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadNextByte	Read a byte from the stream. Will throw an exception if the end of the stream has been reached. (Defined by StreamExtensions)
	ReadNullableString	Reads a string from a Stream that was encoded in UTF8. Value can be null and is prefixed with a boolean. (Defined by StreamExtensions)
	ReadObject	Reads an object from a stream. (Defined by StreamExtensions)
	ReadSByte	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadSingle	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadStream	Reads entire Stream contents, and returns Byte array of data. (Defined by StreamExtensions)
	ReadString	Reads a string from a Stream that was encoded in UTF8. (Defined by StreamExtensions)
	ReadStringCollection	Writes the supplied string to a Stream in UTF8 encoding. (Defined by StreamExtensions)
	ReadUInt16	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadUInt32	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	ReadUInt64	Reads the value from the stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to in little endian format. (Defined by StreamExtensions)
	Write	Writes the entire buffer to the stream (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied string to a Stream in UTF8 encoding. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes a guid in little endian bytes to the stream (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied string to a Stream in UTF8 encoding. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	Write	Writes the supplied value to stream in little endian format. (Defined by StreamExtensions)
	WriteCollection	Writes the supplied Collection to a Stream. (Defined by StreamExtensions)
	WriteCollection	Writes the supplied Collection to a Stream. (Defined by StreamExtensions)
	WriteNullable	Writes the supplied string to a Stream in UTF8 encoding with a prefix if the value is null (Defined by StreamExtensions)
	WriteObject	Encodes an object on a stream. (Defined by StreamExtensions)
	WriteWithLength	Writes the supplied value to stream along with prefixing the length so it can be properly read as a unit. (Defined by StreamExtensions)

FrameParser Class

Reference