![]() |
Series
|
The SeriesValueType type exposes the following members.
Name | Description | |
---|---|---|
![]() ![]() | GetInfo | Gets information about the series value type identified by the given ID. |
![]() ![]() | ToString | Returns the name of the given series value type. |
Name | Description | |
---|---|---|
![]() ![]() | Area | Area under the signal, usually an rms voltage, current, or other quantity. |
![]() ![]() | Avg | Average. |
![]() ![]() | BinHigh | BinHigh. |
![]() ![]() | BinID | BinID. |
![]() ![]() | BinLow | BinLow. |
![]() ![]() | Count | Count. |
![]() ![]() | Duration | Duration. |
![]() ![]() | Ellipse | Ellipse (for lightning flash density). |
![]() ![]() | Frequency | Frequency. |
![]() ![]() | Inst | Instantaneous. |
![]() ![]() | Interval | Interval data. |
![]() ![]() | Latitude | Latitude. |
![]() ![]() | Longitude | Longitude. |
![]() ![]() | Max | Maximum. |
![]() ![]() | Min | Minimum. |
![]() ![]() | P1 | Probability: 1%. |
![]() ![]() | P10 | Probability: 10%. |
![]() ![]() | P5 | Probability: 5%. |
![]() ![]() | P90 | Probability: 90%. |
![]() ![]() | P95 | Probability: 95%. |
![]() ![]() | P99 | Probability: 99%. |
![]() ![]() | PhaseAngle | Phase angle. |
![]() ![]() | PhaseAngleAvg | Phase angle which corresponds to an Avg series. |
![]() ![]() | PhaseAngleMax | Phase angle which corresponds to a Max series. |
![]() ![]() | PhaseAngleMin | Phase angle which corresponds to a Min series. |
![]() ![]() | Polarity | Polarity. |
![]() ![]() | Prob | Cumulative probability in percent. |
![]() ![]() | Status | Status data. |
![]() ![]() | Time | Time. |
![]() ![]() | Transition | Transition event code series. |
![]() ![]() | Val | Value type for a measurement. |
![]() ![]() | XBinHigh | XBinHigh. |
![]() ![]() | XBinLow | XBinLow. |
![]() ![]() | YBinHigh | YBinHigh. |
![]() ![]() | YBinLow | YBinLow. |