![]() |
Series
|
The SeriesValueType type exposes the following members.
Name | Description | |
---|---|---|
![]() ![]() |
Area | Area under the signal, usually an rms voltage, current, or other quantity. |
![]() ![]() |
Avg | Average. |
![]() ![]() |
BinHigh | BinHigh. |
![]() ![]() |
BinID | BinID. |
![]() ![]() |
BinLow | BinLow. |
![]() ![]() |
Count | Count. |
![]() ![]() |
Duration | Duration. |
![]() ![]() |
Ellipse | Ellipse (for lightning flash density). |
![]() ![]() |
Frequency | Frequency. |
![]() ![]() |
Inst | Instantaneous. |
![]() ![]() |
Interval | Interval data. |
![]() ![]() |
Latitude | Latitude. |
![]() ![]() |
Longitude | Longitude. |
![]() ![]() |
Max | Maximum. |
![]() ![]() |
Min | Minimum. |
![]() ![]() |
P1 | Probability: 1%. |
![]() ![]() |
P10 | Probability: 10%. |
![]() ![]() |
P5 | Probability: 5%. |
![]() ![]() |
P90 | Probability: 90%. |
![]() ![]() |
P95 | Probability: 95%. |
![]() ![]() |
P99 | Probability: 99%. |
![]() ![]() |
PhaseAngle | Phase angle. |
![]() ![]() |
PhaseAngleAvg | Phase angle which corresponds to an Avg series. |
![]() ![]() |
PhaseAngleMax | Phase angle which corresponds to a Max series. |
![]() ![]() |
PhaseAngleMin | Phase angle which corresponds to a Min series. |
![]() ![]() |
Polarity | Polarity. |
![]() ![]() |
Prob | Cumulative probability in percent. |
![]() ![]() |
Status | Status data. |
![]() ![]() |
Time | Time. |
![]() ![]() |
Transition | Transition event code series. |
![]() ![]() |
Val | Value type for a measurement. |
![]() ![]() |
XBinHigh | XBinHigh. |
![]() ![]() |
XBinLow | XBinLow. |
![]() ![]() |
YBinHigh | YBinHigh. |
![]() ![]() |
YBinLow | YBinLow. |