![]() |
Ftp
|
The FtpInputDataStream type exposes the following members.
Name | Description | |
---|---|---|
![]() |
BeginRead | Begins an asynchronous read operation. (Consider using ReadAsync(Byte, Int32, Int32) instead.) (Inherited from Stream) |
![]() |
BeginWrite | Begins an asynchronous write operation. (Consider using WriteAsync(Byte, Int32, Int32) instead.) (Inherited from Stream) |
![]() |
Close |
Closes the FTP stream and releases any resources associated with the stream.
(Inherited from FtpDataStream) |
![]() |
CopyTo(Stream) | Reads the bytes from the current stream and writes them to another stream. (Inherited from Stream) |
![]() |
CopyTo(Stream, Int32) | Reads the bytes from the current stream and writes them to another stream, using a specified buffer size. (Inherited from Stream) |
![]() |
CopyToAsync(Stream) | Asynchronously reads the bytes from the current stream and writes them to another stream. (Inherited from Stream) |
![]() |
CopyToAsync(Stream, Int32) | Asynchronously reads the bytes from the current stream and writes them to another stream, using a specified buffer size. (Inherited from Stream) |
![]() |
CopyToAsync(Stream, Int32, CancellationToken) | Asynchronously reads the bytes from the current stream and writes them to another stream, using a specified buffer size and cancellation token. (Inherited from Stream) |
![]() |
CreateObjRef | Creates an object that contains all the relevant information required to generate a proxy used to communicate with a remote object. (Inherited from MarshalByRefObject) |
![]() |
CreateWaitHandle |
Obsolete.
Allocates a WaitHandle object. (Inherited from Stream) |
![]() |
Dispose | Releases all resources used by the Stream. (Inherited from Stream) |
![]() |
Dispose(Boolean) | Releases the unmanaged resources used by the Stream and optionally releases the managed resources. (Inherited from Stream) |
![]() |
EndRead | Waits for the pending asynchronous read to complete. (Consider using ReadAsync(Byte, Int32, Int32) instead.) (Inherited from Stream) |
![]() |
EndWrite | Ends an asynchronous write operation. (Consider using WriteAsync(Byte, Int32, Int32) instead.) (Inherited from Stream) |
![]() |
Equals | Determines whether the specified object is equal to the current object. (Inherited from Object) |
![]() |
Finalize | Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection. (Inherited from Object) |
![]() |
Flush |
Clears all buffers for this stream and causes any buffered data to be written to the underlying device.
(Inherited from FtpDataStream) |
![]() |
FlushAsync | Asynchronously clears all buffers for this stream and causes any buffered data to be written to the underlying device. (Inherited from Stream) |
![]() |
FlushAsync(CancellationToken) | Asynchronously clears all buffers for this stream, causes any buffered data to be written to the underlying device, and monitors cancellation requests. (Inherited from Stream) |
![]() |
GetHashCode | Serves as the default hash function. (Inherited from Object) |
![]() |
GetLifetimeService | Retrieves the current lifetime service object that controls the lifetime policy for this instance. (Inherited from MarshalByRefObject) |
![]() |
GetType | Gets the Type of the current instance. (Inherited from Object) |
![]() |
InitializeLifetimeService | Obtains a lifetime service object to control the lifetime policy for this instance. (Inherited from MarshalByRefObject) |
![]() |
MemberwiseClone | Creates a shallow copy of the current Object. (Inherited from Object) |
![]() |
MemberwiseClone(Boolean) | Creates a shallow copy of the current MarshalByRefObject object. (Inherited from MarshalByRefObject) |
![]() |
ObjectInvariant |
Obsolete.
Provides support for a Contract. (Inherited from Stream) |
![]() |
Read |
Reads a sequence of bytes from the current stream and advances the
position within the stream by the number of bytes read.
(Inherited from FtpDataStream) |
![]() |
ReadAsync(Byte, Int32, Int32) | Asynchronously reads a sequence of bytes from the current stream and advances the position within the stream by the number of bytes read. (Inherited from Stream) |
![]() |
ReadAsync(Byte, Int32, Int32, CancellationToken) | Asynchronously reads a sequence of bytes from the current stream, advances the position within the stream by the number of bytes read, and monitors cancellation requests. (Inherited from Stream) |
![]() |
ReadByte |
Reads a byte from the stream and advances the position within the stream
by one byte, or returns -1 if at the end of the stream.
(Inherited from FtpDataStream) |
![]() |
Seek |
Sets the position within the current stream.
(Inherited from FtpDataStream) |
![]() |
SetLength |
Sets the length of the current stream.
(Inherited from FtpDataStream) |
![]() |
ToString | Returns a string that represents the current object. (Inherited from Object) |
![]() |
Write |
Cannot write to input stream, method is not supported.
(Overrides FtpDataStreamWrite(Byte, Int32, Int32)) |
![]() |
WriteAsync(Byte, Int32, Int32) | Asynchronously writes a sequence of bytes to the current stream and advances the current position within this stream by the number of bytes written. (Inherited from Stream) |
![]() |
WriteAsync(Byte, Int32, Int32, CancellationToken) | Asynchronously writes a sequence of bytes to the current stream, advances the current position within this stream by the number of bytes written, and monitors cancellation requests. (Inherited from Stream) |
![]() |
WriteByte |
Cannot write to input stream, method is not supported.
(Overrides FtpDataStreamWriteByte(Byte)) |
Name | Description | |
---|---|---|
![]() |
Compress |
Compress a stream using specified compression strength.
(Defined by CompressionExtensions) |
![]() |
Compress |
Compress a stream onto given output stream using specified compression strength.
(Defined by CompressionExtensions) |
![]() |
CopyStream |
Copies input Stream onto output Stream.
(Defined by StreamExtensions) |
![]() |
CopyTo |
Writes the contents of a stream to the provided stream.
(Defined by StreamExtensions) |
![]() |
Decompress |
Decompress a stream.
(Defined by CompressionExtensions) |
![]() |
Decompress |
Decompress a stream onto given output stream.
(Defined by CompressionExtensions) |
![]() |
Decrypt |
Returns a stream of decrypted data for the given parameters.
(Defined by Cipher) |
![]() |
Decrypt |
Decrypts input stream onto output stream for the given parameters.
(Defined by Cipher) |
![]() |
DeserializeToDataSet |
Deserializes a DataSet from a Stream.
(Defined by DataSetExtensions) |
![]() |
Encrypt |
Returns a stream of encrypted data for the given parameters.
(Defined by Cipher) |
![]() |
Encrypt |
Encrypts input stream onto output stream for the given parameters.
(Defined by Cipher) |
![]() |
GetEnumValueOrDefault |
Gets the enumeration constant for value, if defined in the enumeration, or a default value.
(Defined by EnumExtensions) |
![]() |
GetEnumValueOrDefaultT |
Gets the enumeration constant for this value, if defined in the enumeration, or a default value.
(Defined by EnumExtensions) |
![]() |
Read7BitUInt32 |
Reads the 7-bit encoded value from the stream.
(Defined by StreamExtensions) |
![]() |
ReadAll |
Reads all of the provided bytes. Will not return prematurely,
but continue to execute a Read(Byte, Int32, Int32) command until the entire
length has been read.
(Defined by StreamExtensions) |
![]() |
ReadBoolean |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadBytes |
Reads a byte array from a Stream.
The number of bytes should be prefixed in the stream.
(Defined by StreamExtensions) |
![]() |
ReadBytes |
Reads a byte array from a Stream.
The number of bytes should be prefixed in the stream.
(Defined by StreamExtensions) |
![]() |
ReadChar |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadDateTime |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadDecimal |
Reads a decimal from the stream in Little Endian bytes.
(Defined by StreamExtensions) |
![]() |
ReadDouble |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadGuid |
Reads a Guid from the stream in Little Endian bytes.
(Defined by StreamExtensions) |
![]() |
ReadInt16 |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadInt32 |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadInt32Collection |
Writes the supplied string to a Stream in UTF8 encoding.
(Defined by StreamExtensions) |
![]() |
ReadInt64 |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadNextByte |
Read a byte from the stream.
Will throw an exception if the end of the stream has been reached.
(Defined by StreamExtensions) |
![]() |
ReadNullableString |
Reads a string from a Stream that was encoded in UTF8.
Value can be null and is prefixed with a boolean.
(Defined by StreamExtensions) |
![]() |
ReadObject |
Reads an object from a stream.
(Defined by StreamExtensions) |
![]() |
ReadSByte |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadSingle |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadStream |
Reads entire Stream contents, and returns Byte array of data.
(Defined by StreamExtensions) |
![]() |
ReadString |
Reads a string from a Stream that was encoded in UTF8.
(Defined by StreamExtensions) |
![]() |
ReadStringCollection |
Writes the supplied string to a Stream in UTF8 encoding.
(Defined by StreamExtensions) |
![]() |
ReadUInt16 |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadUInt32 |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
ReadUInt64 |
Reads the value from the stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the entire buffer to the stream (Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied string to a Stream in UTF8 encoding.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes a guid in little endian bytes to the stream
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied string to a Stream in UTF8 encoding.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
Write |
Writes the supplied value to
stream in little endian format.
(Defined by StreamExtensions) |
![]() |
WriteCollection |
Writes the supplied Collection to a Stream.
(Defined by StreamExtensions) |
![]() |
WriteCollection |
Writes the supplied Collection to a Stream.
(Defined by StreamExtensions) |
![]() |
WriteNullable |
Writes the supplied string to a Stream
in UTF8 encoding with a prefix if the value is null
(Defined by StreamExtensions) |
![]() |
WriteObject |
Encodes an object on a stream.
(Defined by StreamExtensions) |
![]() |
WriteWithLength |
Writes the supplied value to
stream along with prefixing the length
so it can be properly read as a unit.
(Defined by StreamExtensions) |