|
Serializable
|
The SerializableAlarm type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
|
Delay | Gets or sets the amount of time that the signal must be exhibiting alarming behavior before the alarm is raised. |
|
|
Description | Gets or sets the description of the alarm. |
|
|
Hysteresis | Gets or sets the hysteresis used when clearing alarms. |
|
|
ID | Gets or sets the identification number of the alarm. |
|
|
Operation | Gets or sets the operation to be performed when testing values from the incoming signal. |
|
|
SetPoint | Gets or sets the value to be compared against the signal to determine whether to raise the alarm. |
|
|
Severity | Gets or sets the severity of the alarm. |
|
|
SignalID | Gets or sets the identification number of the signal whose value is monitored by the alarm. |
|
|
State | Gets or sets the state of the alarm (raised or cleared). |
|
|
TagName | Gets or sets the tag name of the alarm. |
|
|
TimeRaised | Gets or sets the time at which the alarm was raised. |
|
|
Tolerance | Gets or sets a tolerance window around the SetPoint to use when comparing against the value of the signal. |
|
|
ValueAtTimeRaised | Gets or sets the value of the signal at the time that the alarm was raised. |
See Also