|
Power
|
The PowerCalculator type exposes the following members.
Properties
| Name | Description | |
|---|---|---|
|
AllowPreemptivePublishing |
Gets or sets flag that allows system to preemptively publish frames assuming all ExpectedMeasurements have arrived.
(Inherited from ConcentratorBase) |
|
|
AllowSortsByArrival |
Gets or sets flag that determines whether or not to allow incoming measurements with bad timestamps
to be sorted by arrival time.
(Inherited from ConcentratorBase) |
|
|
AutoStart |
Gets or sets flag indicating if adapter should automatically start or otherwise connect on demand.
(Inherited from ActionAdapterBase) |
|
|
AveragePublicationTimePerFrame |
Gets the average required frame publication time, in seconds.
(Inherited from ConcentratorBase) |
|
|
ConfigurationSection |
Gets or sets the configuration section to use for this CalculatedMeasurementBase.
(Inherited from CalculatedMeasurementBase) |
|
|
ConnectionInfo |
Gets connection info for adapter, if any.
(Inherited from ActionAdapterBase) |
|
|
ConnectionString |
Gets or sets key/value pair connection information specific to action adapter.
(Inherited from ActionAdapterBase) |
|
|
DataSource |
Gets or sets DataSet based data source available to this ActionAdapterBase.
(Inherited from ActionAdapterBase) |
|
|
DiscardedMeasurements |
Gets the total number of measurements that have been discarded because of old timestamps
(i.e., measurements that were outside the time deviation tolerance from base time, past or future).
(Inherited from ConcentratorBase) |
|
|
DownsampledMeasurements |
Gets the total number of down-sampled measurements processed by the concentrator.
(Inherited from ConcentratorBase) |
|
|
DownsamplingMethod |
Gets or sets the DownsamplingMethod to be used by the concentrator.
(Inherited from ConcentratorBase) |
|
|
Enabled |
Gets or sets the current enabled state of concentrator.
(Inherited from ConcentratorBase) |
|
|
ExpectedMeasurements |
Gets or sets the expected number of measurements to be assigned to a single frame.
(Inherited from ConcentratorBase) |
|
|
FramesAheadOfSchedule |
Gets the total number of frames ahead of schedule processed by the concentrator.
(Inherited from ConcentratorBase) |
|
|
FramesPerSecond |
Gets or sets the number of frames per second.
(Inherited from ActionAdapterBase) |
|
|
ID |
Gets or sets numeric ID associated with this action adapter.
(Inherited from ActionAdapterBase) |
|
|
IgnoreBadTimestamps |
Gets or sets flag that determines if bad timestamps (as determined by measurement's timestamp quality)
should be ignored when sorting measurements.
(Inherited from ConcentratorBase) |
|
|
InitializationTimeout |
Gets or sets maximum time system will wait during Start for initialization.
(Inherited from ActionAdapterBase) |
|
|
Initialized |
Gets or sets flag indicating if the action adapter has been initialized successfully.
(Inherited from ActionAdapterBase) |
|
|
InputMeasurementKeys |
Gets or sets primary keys of input measurements the calculated measurement expects.
(Inherited from CalculatedMeasurementBase) |
|
|
InputMeasurementKeyTypes |
Gets or sets input measurement SignalType's for each of the InputMeasurementKeys, if any.
(Inherited from CalculatedMeasurementBase) |
|
|
InputSourceIDs |
Gets or sets Source values used to filter input measurement keys.
(Inherited from ActionAdapterBase) |
|
|
IsDisposed |
Gets a flag that indicates whether the object has been disposed.
(Inherited from ActionAdapterBase) |
|
|
LagTicks |
Gets defined past time deviation tolerance, in ticks.
(Inherited from ConcentratorBase) |
|
|
LagTime |
Gets or sets the allowed past time deviation tolerance, in seconds (can be sub-second).
(Inherited from ActionAdapterBase) |
|
|
LastDiscardedMeasurement |
Gets a reference the last IMeasurement that was discarded by the concentrator.
(Inherited from ConcentratorBase) |
|
|
LastDiscardedMeasurementLatency |
Gets the calculated latency of the last IMeasurement that was discarded by the concentrator.
(Inherited from ConcentratorBase) |
|
|
LastFrame |
Gets reference to the last published IFrame.
(Inherited from ConcentratorBase) |
|
|
LatestMeasurements |
Gets reference to the collection of absolute latest received measurement values.
(Inherited from ConcentratorBase) |
|
|
LeadTime |
Gets or sets the allowed future time deviation tolerance, in seconds (can be sub-second).
(Inherited from ActionAdapterBase) |
|
Log |
Log messages generated by an adapter.
(Inherited from ConcentratorBase) |
|
|
MaximumPublicationTimeout |
Gets or sets the maximum frame publication timeout in milliseconds, set to Infinite(-1) to wait indefinitely.
(Inherited from ConcentratorBase) |
|
|
MeasurementsSortedByArrival |
Gets the total number of measurements that were sorted by arrival because the measurement reported a bad timestamp quality.
(Inherited from ConcentratorBase) |
|
|
MinimumMeasurementsToUse |
Gets or sets minimum number of input measurements required for adapter. Set to -1 to require all.
(Inherited from ActionAdapterBase) |
|
|
MissedSortsByTimeout |
Gets the total number of missed sorts by timeout processed by the concentrator.
(Inherited from ConcentratorBase) |
|
|
Name |
Gets name of the action adapter.
(Inherited from ActionAdapterBase) |
|
|
OutputMeasurements |
Gets or sets output measurements that the calculated measurement will produce, if any.
(Inherited from CalculatedMeasurementBase) |
|
|
OutputMeasurementTypes |
Gets or sets output measurement SignalType's for each of the OutputMeasurements, if any.
(Inherited from CalculatedMeasurementBase) |
|
|
OutputSourceIDs |
Gets or sets Source values used to filter output measurements.
(Inherited from ActionAdapterBase) |
|
|
PerformTimestampReasonabilityCheck |
Gets or sets flag that determines if timestamp reasonability checks should be performed on incoming
measurements (i.e., measurement timestamps are compared to system clock for reasonability using
LeadTime tolerance).
(Inherited from ConcentratorBase) |
|
|
ProcessByReceivedTimestamp |
Gets or sets flag that determines if concentrator should sort measurements by received time.
(Inherited from ConcentratorBase) |
|
|
ProcessedMeasurements |
Gets the total number of measurements successfully sorted.
(Inherited from ConcentratorBase) |
|
|
ProcessingInterval |
Gets or sets the desired processing interval, in milliseconds, for the adapter.
(Inherited from ConcentratorBase) |
|
|
PublishedFrames |
Gets the total number of published frames.
(Inherited from ConcentratorBase) |
|
|
PublishedMeasurements |
Gets the total number of published measurements.
(Inherited from ConcentratorBase) |
|
|
QueueState |
Gets detailed state of concentrator frame queue.
(Inherited from ConcentratorBase) |
|
|
RealTime |
Gets the most accurate time value that is available. If UseLocalClockAsRealTime = true, then
this function will return UtcNow. Otherwise, this function will return the timestamp of the
most recent measurement, or UtcNow if no measurement timestamps are within time deviation
tolerances as specified by the LeadTime value.
(Inherited from ConcentratorBase) |
|
|
ReceivedMeasurements |
Gets the total number of measurements ever requested for sorting.
(Inherited from ConcentratorBase) |
|
|
RequestedInputMeasurementKeys |
Gets or sets input measurement keys that are requested by other adapters based on what adapter says it can provide.
(Inherited from ActionAdapterBase) |
|
|
RequestedOutputMeasurementKeys |
Gets or sets output measurement keys that are requested by other adapters based on what adapter says it can provide.
(Inherited from ActionAdapterBase) |
|
|
RespectInputDemands |
Gets or sets flag indicating if action adapter should respect auto-start requests based on input demands.
(Inherited from ActionAdapterBase) |
|
|
RespectOutputDemands |
Gets or sets flag indicating if action adapter should respect auto-start requests based on output demands.
(Inherited from ActionAdapterBase) |
|
|
RoundToNearestTimestamp |
Gets or sets a value to indicate whether the concentrator should round to the
nearest frame timestamp rather than rounding down to the nearest timestamps.
(Inherited from ConcentratorBase) |
|
|
RunTime |
Gets the total amount of time, in seconds, that the concentrator has been active.
(Inherited from ConcentratorBase) |
|
|
SampleSize | Gets or sets the sample size of the data to be monitored. |
|
|
Settings |
Gets settings DictionaryTKey, TValue parsed when ConnectionString was assigned.
(Inherited from ActionAdapterBase) |
|
|
ShowConcentratorStatus |
Gets flags that determines if ConcentratorBase class status should be included in ActionAdapterBase status.
(Inherited from ActionAdapterBase) |
|
|
StartTime |
Gets the UTC time the concentrator was started.
(Inherited from ConcentratorBase) |
|
|
StartTimeConstraint |
Gets the start time temporal processing constraint defined by call to SetTemporalConstraint(String, String, String).
(Inherited from ActionAdapterBase) |
|
|
Status |
Returns the detailed status of the PowerCalculator.
(Overrides CalculatedMeasurementBaseStatus) |
|
|
StopTime |
Gets the UTC time the concentrator was stopped.
(Inherited from ConcentratorBase) |
|
|
StopTimeConstraint |
Gets the stop time temporal processing constraint defined by call to SetTemporalConstraint(String, String, String).
(Inherited from ActionAdapterBase) |
|
|
SupportsTemporalProcessing |
Gets the flag indicating if this adapter supports temporal processing.
(Overrides CalculatedMeasurementBaseSupportsTemporalProcessing) |
|
|
TicksPerFrame |
Gets the number of ticks per frame.
(Inherited from ConcentratorBase) |
|
|
TimeResolution |
Gets or sets the maximum time resolution, in ticks, to use when sorting measurements by timestamps into their proper destination frame.
(Inherited from ConcentratorBase) |
|
|
TotalPublicationTime |
Gets the total number of seconds frames have spent in the publication process since concentrator started.
(Inherited from ConcentratorBase) |
|
|
TrackLatestMeasurements |
Gets or sets flag to start tracking the absolute latest received measurement values.
(Inherited from ConcentratorBase) |
|
|
TrackRecentValues | Gets or sets flag that determines if the last few values should be monitored. |
|
|
UseLocalClockAsRealTime |
Gets or sets flag that determines whether or not to use the local clock time as real-time.
(Inherited from ConcentratorBase) |
|
|
UsePrecisionTimer |
Gets or sets flag that determines if precision timer should be used for frame publication.
(Inherited from ConcentratorBase) |
|
|
WaitHandleExpirations |
Gets the total number of wait handle expirations encountered due to delayed precision timer releases.
(Inherited from ConcentratorBase) |
See Also