Fault detected on <xsl:value-of select="/data/EventDetail/Line/Name" /> (<xsl:value-of select="/data/EventDetail/Line/AssetKey" />) Fault -
DFRs: at triggered at (https://ts-pqdashboard.southernco.com/OpenSEE/?eventid=&faultcurves=1click for waveform)
&nbsp; &nbsp;
Files:
&nbsp; &nbsp;
Line: ( miles)

- -
Fault Type:
Inception Time:
Fault Duration: msec ( cycles)
Fault Current: Amps (RMS)
Distance Method:
Single-ended Distance: miles
Double-ended Distance: miles
Double-ended Angle: &deg;
openXDA Event ID:

Probability of Fault Cause
DFR: ()
Tree: Undetermined High (Rf = ) Medium (Rf = ) Low (Rf = )
Lightning: Lightning study performed below Confirmed at fault inception ( ms) Detected, but not at fault inception ( ms)
Insulation Flashover: Undetermined High (&deg; from peak) Medium (&deg; from peak) Low (&deg; from peak)
Arrester Failure: Undetermined High () Medium () Low ()
Conductor Slap / Debris Midspan: No (applies only to multi-phase faults) Undetermined High () Medium () Low ()
Broken Conductor: Undetermined High () Medium () Low ()

Fault Trace
http://ts-pqdashboard.southernco.com/openftt/?totalLine= & stationname_ = & lineid_ = & distance_ = & eventtime_ = View in FTT
http://localhost/openftt/?zoomToFault=n&output=jpg&totalLine= lineid_{index}={line}&stationname_{index}={station}&distance_{index}={distance:0.######}&eventtime_{index}={eventTime:yyyy-MM-ddTHH:mm:ss.fffffff}
Line Parameters: Value: Per Mile:
Length (Mi) 
1.0
Pos-Seq Imp
Z1 (Ohm)
(LLL,LLLG,LL,LLG) 
&ang;&deg;
+j
 
&ang;&deg;
+j
Zero-Seq Imp
Z0 (Ohm) 
&ang;&deg;
+j
 
&ang;&deg;
+j
Loop Imp
ZS (Ohm)
(LG) 
&ang;&deg;
+j
 
&ang;&deg;
+j